Кабели и блоки питания

Cable 30XLR, 30V extension cable 3 m (9 ft) with 4-pin XLR connectors.

Cable 12XLR, 12 V extension cable 3 m (9 ft) with 4-pin XLR connectors.

Cable 12YXLR, 12 V divider cable to operate camera and fixture from the same battery; length 90 cm (3 ft) with female plug, 50 cm (1.6 ft) without plug

Adapter cable XLR-AB, extension cable to connect luminaires with Anton/Bauer Power Tap connector to batteries with XLR outlet 4-pin, length 1.5 m (4.9 ft).

Adapter cable AB-XLR, cable with female XLR 4-pin connector and Anton/Bauer Power Tap plug 2-pin, length 10 cm (4 in).

Dimmer PowerBase DPB75HAB same as Dimmer PowerBase DPB75H, but with 0.75 m/2.5 ft cable and Anton/Bauer Power Tap connector 2-pin. The Sachtler DPB75HAB is a dimming powerbase for the Reporter 75H on camera light. This powerbase attaches to the camera shoe and connects to a Power Tap 12 VDC power source. The Reporter 75H then attaches to the base and operates in its normal state with dimming capabilities.

The Sachtler DPB75H is a dimmer powerbase for the Reporter 75H on camera light. This dimmer powerbase with 4.9' cable attaches to the camera shoe and connects to a 4-Pin XLR 12 VDC power source. The Reporter 75H then attaches to the base and operates in its normal state.

The Sachtler PB75HAB is a powerbase for the Reporter 75H on camera light. This powerbase attaches to the camera shoe and connects to a Power Tap 12 VDC power source. The Reporter 75H then attaches to the base and operates in its normal state.

The Sachtler PB75H is a powerbase for the Reporter 75H on camera light. This powerbase with 4.9' cable attaches to the camera shoe and connects to a 4-Pin XLR 12 VDC power source. The Reporter 75H then attaches to the base and operates in its normal state

Plug XLR, 4-pin XLR-plug (coaxial)

Anton Bauer Powertap Connector for Sachtler Reporter 75H provides connection between the battery and fixture cable.

The Sachtler Powertap Connector -- A/B Female, 2 pin, is for connecting a Sachtler on-camera light fixture to the host camera's battery source.

1 x кабель-удлинитель A / B подключение питания, 1 x кабель с адаптером A / B питания – XLR 4-pin, 1 x кабель с адап­тером A / B питания – сетевой разъем, 1х адаптер питания от бортовой сети автомобиля A / B

Блок питания Dedolight DT12DC для осветителя Dedolight DLOBA2. Выходное напряжение - 12 В. Питание - 220 В.

Кабель для подключения DLOBA² к аккумуляторам PAG.

Кабель для подключения DLOBA² к аккумуляторам Anton/Bauer с крепежной платой Golden Mount®.

Универсальный кабель с 4 pin разъемом XLR для подключения DLOBA² к любым внешним аккумуляторам и батарейным поясам.